Skip to content

Showing all 2 results

Adjusting sliding screen door rollers

Adjusting sliding screen door rollers is a relatively simple task that can help your door slide more smoothly and improve its overall functionality. Here are the steps you can follow to adjust the rollers on a sliding screen door:

  1. First, locate the adjustment screws on the bottom of the door. These screws will typically be found on the corners of the door, and they may be covered by small plastic caps.
  2. Use a flathead screwdriver to remove the caps and expose the adjustment screws.
  3. Test the door by sliding it open and closed. If the door is difficult to open or close, or if it sticks or binds in any way, you will need to adjust the rollers to correct the problem.
  4. To raise the door, tighten the adjustment screws on the bottom corners of the door. To lower the door, loosen the screws.
  5. Once you have adjusted the rollers to your satisfaction, replace the plastic caps to protect the screws.
  6. Test the door again to make sure it is sliding smoothly and correctly. If the door is still having problems, you may need to repeat the adjustment process or consider replacing the rollers.

I hope this information helps! Let me know if you have any other questions.

America's Best Screen Door Company - Shielding Your Windows & Doors since 2002