Sale!

Plastic Roller with Metal Corner for Economy Sliding Screen Door

$7.50

The plastic roller with metal corner is a replacement part for the Economy Sliding Screen Door.  The sliding screen door will need to be disassembled in order to replace this part.  Requires a dead blow hammer and a rolling tool to replace.

Description

The Plastic roller for the Economy Sliding Screen Door Replacement Part only comes together with the strong metal corner. Way better then other low cost imported sliding screen doors with plastic corners.  The vinyl wheel works well with vinyl sliding glass doors.  Best Customer Screens values quality over price, even in our Economy brand.

Plastic Roller Replacement Instructions:

  1. Remove the spline on the side you are replacing. You do not need to remove the entire screen unless you are replacing all 4 corners.
  2. Gently pull back the screening material from the frame
  3. With a dead blow mallet remove the top or bottom frame you are working on.
  4. Remove the corner from the frame.
  5. Insert new Steel Roller into the corner
  6. Re-assembled frame to corners
  7. Attached screening material with spline using the Rolling Tool

 

Adjustment screw for vinyl roller with metal corner
Side view of plastic roller
Back view of corner with wheel
Plastic Roller for Economy Sliding Screen Door
Order your dead blow mallet on Amazon today!
Purchase your deluxe rolling tool and ice pick today on Amazon

Reviews

There are no reviews yet.

Be the first to review “Plastic Roller with Metal Corner for Economy Sliding Screen Door”